Homeowners often encounter plumbing problems such as low water pressure, a dripping faucet, clogged drain, etc. In this situation, you might be tempted to contact a professional plumber, but you don't need to panic. You will be surprised to know that there are several plumbing tasks that you can carry out on your own. All you need is a little bit of know-how and the right tools.
However, if you don't want to make the plumbing problem worse by following DIY methods, you can opt for a professional handyman in Australia. They have experience and expertise in an extensive range of household repair and maintenance work, including plumbing. They also charge a reasonable price in comparison to seasoned plumbers. However, if you want to get the job done yourself, you will need some guidance.
Read on to know about some smarter ways to be your own plumber.
Always keep in mind that your home has a main shut-off valve that is positioned someplace around the perimeter. You might even find an intermediary shut-off valve near the broken pipe if you're lucky. After that, you will have more time and mental clarity to analyse the problem. A leaking copper pipe can be cut on both sides of the breakpoint and removed. Then use a push-fit pipe to join the copper pipe.
A faucet aerator is a small device attaches to the end of a faucet and allows air to enter the water stream. This makes the water stream feel smoother and softer, as well as makes it easier to operate. You need to unscrew the aerator from the current faucet. If the screen gets jammed with silt, turn it upside down and clean it before replacing it.
Replacing a showerhead is very simple and doesn't require any plumbing skills. You need to simply unscrew the old showerhead, clean and remove any grime from the fixture, and replace it with the new shower head. Although this seems like a simple task, it can cut your water consumption by up to 25% to 30%. If you want to get the job done professionally, find a good handyman near you.
When you need to get ready quickly, low water pressure while taking a shower can be frustrating. Fortunately, restoring the water pressure is as simple as replacing your current water-constricting showerhead. It is also possible that the showerhead is clogged with silt, in which case you should soak it in vinegar. If you are still having problems, you may want to opt for a certified handyman in Australia.
It is simple to replace sealant, but you will require a cartridge pistol. Remove the old sealant with a knife by slicing through the top and bottom edges at one end and gently pushing it away from the wall. Before resealing your bath, make sure the spaces between the bath and the tile are as broad as possible. This will make it easy to apply the sealant. Simply fill the space with the cartridge pistol in one smooth, steady motion. Finally, let it get dry.
Pliers and screwdrivers are required to remove the tub drain. If you have the time, go to your local hardware store and purchase a tub drain removal and best DIY tool. Turn off the water and remove the drain. Before reinstalling the tub drain, you need to apply a clay-like substance known as plumber's putty under it. The tub will leak if you don't use this putty. So take your time with this step and make sure the putty and the tub are well sealed. Reinstall the drain, tighten it, and wipe away any excess putty with your finger.
To remove things that have clogged the drain, use a plunger to produce suction and push the blockage downwards. If this fails, take a cable auger. You simply work this through the pipes and into the drain. If the drain still doesn't run freely, you can use natural ingredients like baking soda and vinegar to break down any remaining debris, which should unclog your drain.
Depending on the sort of faucet you have, this is a reasonably simple fix. It usually necessitates the replacement of the tap's washer, which is a tiny ring made of stainless steel. They are cheap and easy to come by at any hardware store. The tap must then be unscrewed, and the washer replaced. It is a good idea to remove the old washer first and bring it with you to the store, so you obtain the correct size for your sink.
Garbage disposals that are clogged or jammed are one of the easiest repairs. You shouldn't even need an extra tool because every new garbage disposal should come with a wrench built-in. If your garbage disposal jams, your garbage disposal should come with instructions on how to fix it properly. Before attempting any repairs, check sure the power to the disposal is shut off. To avoid blockages or jams, run it as often as possible.
For the majority of people doing the plumbing job on their own can be challenging, and it also involves the risk of making the problem worse. However, you can make the task easier and minimise your stress level by performing the aforementioned plumbing jobs yourself. If you fail to do it properly or need professional help, you can always hire a reliable handyman in Australia.